The Licking River Permit Split
West of the Licking River, Kenton County cities send permits to PDS. East of it, Campbell County or Newport’s own inspector handles them.
We handle commercial roofing near Covington in 12 towns with their own pages plus Silver Grove and Melbourne, across Kenton and Campbell counties.

Our commercial roofing near Covington covers the towns below, grouped by straight-line distance from central Covington.
Not on the list? Call us or send us a message about your building.
Latonia sits inside Covington, so roof jobs take the city zoning permit and then PDS. Shop and retail roofs here lean on one or two drains.
Latonia Commercial Roofing →Commercial lots climb the hills near I-71/75, and crane pads and dumpster spots get picked on level paving before tear-off.
Fort Wright Commercial Roofing →Low industrial and commercial lots near the Licking River get staging on higher ground and leaders flushed of silt after high water.
Wilder Commercial Roofing →Most businesses line Dixie Highway under wooded slopes, so roofs get raised strainers, gutter guards, and overflow scuppers.
Park Hills Commercial Roofing →Larger retail and office roofs uphill from Newport go through Campbell County, with the plan review contact looped in early.
Southgate Commercial Roofing →Office, retail, and institutional roofs near the university carry heavy units, so curbs, condensate, and walkway pads lead the plan.
Highland Heights Commercial Roofing →Visible roof work in the East Row, York Street, and Buena Vista districts needs a Certificate of Appropriateness before the city permit.
Newport Commercial Roofing →Riverside buildings west of Covington send permits to PDS, with coping, scuppers, and riverbank crane spots spelled out.
Ludlow Commercial Roofing →Retail and office roofs along US 27 start with confirming the permit office, since the state sheet leaves the city off.
Cold Spring Commercial Roofing →Hilltop buildings take the most wind at corners and edges, so adhered membrane and tested edge metal come first.
Fort Thomas Commercial Roofing →Attached storefronts share party walls, so flashing and coping at the shared wall get planned with the neighbor.
Bellevue Commercial Roofing →Warehouses and shops on low river lots follow Kentucky code and get their drain leaders cleared before tie-ins.
Dayton Commercial Roofing →Straight-line distances from central Covington, rounded.
Call us with the address. Coverage questions get a straight answer on the first call.
The roof work stays the same from town to town; permits, staging, and weather exposure change.
West of the Licking River, Kenton County cities send permits to PDS. East of it, Campbell County or Newport’s own inspector handles them.
Covington’s overlay and Newport’s districts review visible roof changes such as coping, edge metal, and pitched metal panels.
Dayton, Wilder, Ludlow, Silver Grove, and Melbourne staging moves to higher ground, and drain leaders get flushed of silt.
Fort Thomas and other hilltop lots get adhered corners, tested edge metal, and ridge caps set at the maker’s spacing.
Hills in Fort Wright and the US 27 corridor in Cold Spring push crane and dumpster spots onto level paving away from entrances.
Park Hills and other wooded slopes get raised drain strainers, gutter guards, and overflow scuppers.
Building permit offices by town, from the state’s Kenton and Campbell County contact sheets.
| City | County | Building Permit Office |
|---|---|---|
| Covington and Latonia | Kenton | PDS of Kenton County, after the city zoning permit |
| Ludlow, Fort Wright, Park Hills | Kenton | PDS of Kenton County |
| Newport | Campbell | City of Newport building inspector |
| Bellevue, Dayton, Southgate, Highland Heights | Campbell | Campbell County building inspection |
| Fort Thomas, Wilder | Campbell | Campbell County for commercial work |
| Silver Grove, Melbourne | Campbell | Campbell County building inspection |
| Cold Spring | Campbell | Absent from the state list; ask the city |
Covington roof replacements start with a City of Covington zoning permit, then Planning and Development Services of Kenton County issues the building permit and handles inspections. A clear scope helps both offices: area and layers removed, new system and taper, expected deck repairs, and curbs, drains, and caps being changed.
Commercial roofing work also covers Silver Grove and Melbourne, two Ohio River cities in Campbell County whose permits go to the county building inspection office. Low sites in both get river-level checks before cranes and dumpsters are set, and drains get cleared of silt after high water.
Roof cost follows area, tear-off depth, insulation, and details, which match on both sides of the river. Permit fees and steps differ by office, so the scope lists which office applies to your address.
Latonia lies within Covington, so its roofs follow the Covington zoning permit and PDS. Confirm the parcel against Covington records first, since mailing addresses near the edges can mislead.
Owners with buildings in, say, Newport and Bellevue can have both roofs walked on one trip. Each gets its own scope and permit path.
Send the address, and we will confirm coverage and set up the roof walk.